use menomonmon::{
    monitor,
    CliArgs,
    UsbmonFilter,
};


fn main() {
    // get optional device filter from command-line args
    let dev_filter = CliArgs::dev_filter();

    // Start outputting packets when the device descriptor is fetched.
    // This is the first thing linux does when a device is plugged in.
    let start_filter = UsbmonFilter {
        epnum: Some(|x: u8| x == 0x00),              // EP 0
        setup_request_type: Some(|x: u8| x == 0x80), // standard request
        setup_request: Some(|x: u8| x == 0x06),      // get descriptor
        setup_value: Some(|x: u16| x == 0x0100),     // device descriptor
        setup_length: Some(|x: u16| x == 18),        // 18-byte request
        ..Default::default()
    };

    // Stop outputting packets when the FIDO HID Report descriptor is
    // fetched.  This is approximately the last thing linux does when
    // enumerating a FIDO/U2F device.
    let end_filter = UsbmonFilter {
        epnum: Some(|x: u8| x == 0x00),              // EP 0
        setup_request_type: Some(|x: u8| x == 0x81), // standard request
        setup_request: Some(|x: u8| x == 0x06),      // get descriptor
        setup_value: Some(|x: u16| x == 0x2200),     // HID Report
        setup_index: Some(|x: u16| x == 0x0001),     // FIDO descriptor
        pkts_after: 1,                               // get reply
        ..Default::default()
    };

    // output all packets for the selected device between the two
    // filter events.
    let usec = monitor(Some(&dev_filter), Some(&start_filter), None, Some(&end_filter));

    println!("FIDO device enumerated in: {usec} µs")
}